Transport
Operating manual
KINET
V1.4 E
Page 11 of 40
5 Transport
Transport the tilting bath tub towards the planned place of installation. Use a lift truck
or similar for the transport.
Position the bath so that it stands stable and cannot tilt.
5.1 Unpacking the product
To remove the packaging materials, you will need a cutter knife.
NOTE
Take care so as to not damage the product when using tools.
Do not cut with the cutter in the cardboard.
Removing the cardboard
Proceed in the following way to remove the cardboard:
•
Cut the strap with the cutter knife
•
Remove the strap
•
Lift the cardboard up to remove it and put it aside
Loosening the product from the pallet
The bath tub is screwed to the pallet.
Proceed in the following way to loosen the
product from the pallet:
•
Remove the cover of the tub’s feet and
unscrew the 4 screws with the electric
screwdriver.
After loosening all fixations, you can lift the tilting bath tub from the pallet and
position it at the planned place of use.
Remove the bubble wrap and the stretch film and/or the protective bag.
NOTE
Take care so as to not damage the product when using tools.
