06
Do not fold or crush the water supply hose.
• Doing so could cause water leaks.
To prevent a sudden water leak, do not remove the water filter drain valve
when the water supply valve is open.
• Doing so will cause water to spurt out.
Refer to Page 37 for instructions on cleaning the water fi lter drain valve.
Do not install the base plate, which is not attached, to the Washlet.
• Doing so could cause a fi re or damage.
Do not use the product if the main unit is unstable.
If a water leak should occur, always close the water supply valve.
Preventing damage to pipes and hoses due to freezing
• Frozen water pipes could cause the main unit and the pipes to break, resulting in a water leak.
Regulate the room temperature to prevent the pipes and hoses from freezing during cold months.
When not using the Washlet over an extended period of time, drain the water
out of the Washlet and the water supply hose, and pull the electrical plug
from the outlet.
When using the product again, allow the product to refi ll with water fi rst.
• Otherwise, the water in the tank might become contaminated and cause skin infl ammation or
other problems.
• Leaving the power ON might cause a fi re or heat.
When installing the water filter drain valve, make sure that it is securely
tightened in its proper position.
• Failure to securely tighten it might cause water leaks.
Push the main unit securely on to the base plate.
After pushing the main unit until a click sound is heard, pull it slightly toward you to make sure that
the product does not detach.
• Failure to do so could cause the main unit to come loose and fall resulting in injury.
