background image

Water Cut-off While Washing

Please confirm: The machine will stop automatically in

 

 4 mins after pressing the 

Rear or Bidet button.

 

Solution: Re-press Rear or Bidet  button.

Please confirm: Whether left the seat while washing.

 

Solution: Re-press Rear or 

Bidet  button.

Water Temperature Is Not Hot Enough

Please confirm: Whether the water temperature is set at

 

 Low or Normal Temp.

Solution: Reset water temperature.

Please confirm: Whether the seat ring Temp is set a Low gear or Turn-off status.

Solution: Reset seat ring Temp following the

Remote-Cotrol Instructions.

Please confirm: Whether it is set at Economy status.

 

Solution: Press Economy 

button on the Control to exit the

 

 status.

Please confirm: Whether there is a blackout.

Solution: Wait till the power restored.

Seat Ring Temperature Is Not Hot 

Air Cut-off While Dryer

Please confirm: The machine will stop automatically in

 

 4 mins after pressing the 

Dryer button.

Solution: Re-press Dryer button.

Please confirm: Whether left the seat while dryer.

 

Solution: Re-press Dryer button.

Warm-air Temperature Is Not Hot 

Please confirm: Whether the air temp. is set at low

 

 gear or off status.

Solution: Reset air temp. following the Remote-Con

 

trol Instructions.

16

Summary of Contents for X7-US Series





























Reviews: