Beissbarth Start Line MS 201 Original Instructions Manual Download Page 8 | Manualshive

Page: 8 / 25

background image

1 695 108 073

2016-07-27

|

Bosch Automotive Service Solutions srl

32 | Start Line MS 201 | Product description

en

4. Transport

4.1

Transport and packing

The MS 201 must be placed in the original
packaging for transport. The package should comply
with the following requirements.

The package size requirement:

Dimensions

Package size

Width

1150 mm

Length

1200 mm

Height

1050 mm

4.2

Transport method

¶

Open the top package, plug the fork of the forklift
from bottom of the original package.

i

Keep the original package for the future
transporting.

5. Unpacking

5.1

Unpacking

¶

When unpacking, the operator should wear the
proper protective gear such as protective gloves.

¶

Check the delivery carefully to make sure that all
parts have been delivered. If there is any mistake,
please contact your authorized dealer at once.

¶

The objects in the carton, such as boards, nails,
screws and plastic bags, should be stored in a safe
location.

¶

If there are any environmentally harmful or non-
degradable substances, you should treat them in
accordance with local laws and regulations.

!

During the process of unpacking, assembly and
transporting, you should follow the following
requirements and handle with care. Otherwise, the
MS 201 could be damaged.

1. Detach the upper cover of the carton and make

sure whether there is any damage or not during
transporting.

2.

Find the fastening screws holding the MS 201 on
the pallet.

5.2

Setting up the MS 201

!

Steps 1 - 11 must be completed on the pallet. Do
not loosen the screw and secure the mounting arm
until installation is complete while the MS 201 is
being moved.

1.

Fasten the hoisting strap (mod. DR 750, 3 m and DR
735, 1.5 m, factor 6:1).

!

Hoisting strap requirement: more than 1 metric ton
and safety factor 6:1.

2.

You should use the above method whenever the
MS 201 is moved.

!

Do not move the MS 201 unless the MS 201
has been disconnected from the voltage and
compressed air supplies.

3.4

Scope of delivery

Denomination

Quantity

MS 201

1

Bead beaker assembly

1

Mounting lever

1

Inflation gun with pressure gauge

1

Bead breaker cover

1

Protection cover claw

1

Mounting tool cover

1

«
...
6
7
8
9
10
...
»

Summary of Contents for Start Line MS 201


























Reviews:

No comments

Related manuals for Start Line MS 201

Brand: Black Diamond Equipment Pages: 19

Brand: Mondolfo Ferro Pages: 76

Startline S 421

Brand: Mondolfo Ferro Pages: 402

Strong-Arm CMTC1

Brand: Clarke Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands