1
LCD screen: for the switching, EDID, IP etc information display.
2
OUTPUT: 4 HDMI output buttons
3
INPUT: 4 HDMI input buttons
4
CONTROL:
UP
：
for upward controlling
EDID
：
Press it to enter EDID set mode. EDID Read
：
For example
，
in order to read the EDID
of output port OUT5 to input port 1, we need to press the EDID button(the indicator of
EDID lights) firstly, press the button 1 on IN side secondly, then press UP or DOWN button
to select OUT5, at the same time button 5 on OUT side lights, finally press ENTER button
(the indicator of ENTER button will flash for one time ).
SAVE:
Press to save the switching status.
Down
：
for upward controlling
ENTER:
Press to confirm to save the setting.
RECALL:
Press it to recall the presets/scenes.
5
IR: IR receiver for the IR remote control
6.2 Description of back panel
1
For the ground wiring
2
INPUT: 4 female HDMI Input ports
3
OUTPUT: 4 female HDMI output ports
4
RS232 IN: Female RS232 port for the R232 control
5
LAN: for the IP/TCP control, the default IP address is 192.168.1.80
6
DC12V: power supply port
