Verify that the package contains the items listed below.
a) USB Cable for charging battery
b) Connection cable between probe and TS1007
Certificate of Guarantee.
To prevent damage to the product or injury to you and the other person, before using the tester, read very
carefully and entirety the following warnings safety rules.
Keep in a way that anyone who uses the device can consult them before.
For your safety
Immediately turn off the appliance in the event of malfunctioning.
In the event you detect smoke or a pungent or unusual odour coming from the appliance or power supply
iImmediately turn off the device,and send to the nearest Service Centre.
Do not try to dismantle the appliance.
Contact with internal components of the detector can cause injury. In the event of faults, the product should
only be repaired by qualified personnel.
If the device breaks due to a fall or other accident, please consult the service center for repair.
Use the correct cables supplied.
To ensure the product complies with standards, for terminal input and output connection only use the cables
supplied for this purpose or those sold separately by BEINAT S.r.l.
Avoid contact with liquid crystals.
In the event the display breaks, pay attention not to injure yourself with the glass fragments and avoid the
liquid crystals coming in contact with your skin, eyes or mouth
Warmings
From the experience since 40 years and the requirements of the rules of the test, BEINAT Srl has built a new tool
Tester TS1007 for its own products.
Mainly this new device is suitable to test all conventional probes to detect explosive and toxic gas manufactured
by BEINAT Srl
This device allows to read all of the data and the configuration of work that are in the memory of the probes, also,
having supplied by the serial transmission, it prints the ticket that confirms the testing data, certifying your own
work.
By the Tester TS1007, you can read all of the events that occurred in the probe, such as:
1) The type of probe
2) The serial number of the probe.
3) The status of current work, WAITING
(warm up)
- READING DATA - FAULT - ALARM.
4) How many times the voltage has been On/Off.
5) How many times it issued an alarm.
6) The status of the current calibration.
7) How many times the correction has been made.
8) How many operating days remain before the substitution of the sensing element.
Page 2
Thank you for choosing the BEINAT S.r.L. digital tool, model TS1007.
This manual is designed to help you get the maximum functionality and efficiency automatic of the product .
Read these instructions carefully before use and always keep them within hands reach while using the
instrument.
The illustrations and the text of the screens shown in this manual may differ from the actual screens.
Before Beginning
Main features
