Beijing TIME 5100 Instruction Manual Download

Page: 40 / 46

●

The replacement of battery should be finished within 15 minutes, if beyond

it the memory data may

lost.

●

Please collect the used battery avoiding pollution.

6.13

Backlight

The LCD screen has EL backlight. It is convenient to use in dark condition. Press any one of three keys

and press

simultaneously, the backlight will be function on. Also the

backlight can be set under the main menu see 6.6.

6.14

Auto Power Off

●

The tester has the function of auto power off to save the power of battery.

If there is neither measurement nor any key operation within 5 minutes, the tester will shut off

automatically.

●

The screen will glint for 20 seconds before power off. Except

key, press any

key to stop the twinkle of LCD screen and stop the operation of power off at the moment.

●

While voltage of battery is too low, the tester will show < Battery Empty!>, then power off

automatically.

Summary of Contents for TIME 5100















































Search results

Summary of Contents for TIME 5100

Reviews:

Related manuals for TIME 5100

Brands by name

Popular brands

Beijing TIME 5100, Instruction Manual

Search results

Summary of Contents for TIME 5100

Reviews:

Related manuals for TIME 5100

Brands by name

Popular brands