Ethernet operation mode
The Ethernet port is default as auto-sensing and provides auto MDI/MDIX
crossover function. If need change the status of port, please refer to the table shown
below for setting.
Connecting
equipment (NIC,
switch etc.)
Setting of Ethernet port of converter
10/100M
Auto-sensing
port
a. Enable auto-sensing (default) function, 100M full duplex
(common mode) will be obtained.
b. Disable auto-sensing function, force port to 10M half duplex
mode. 10M half-duplex will be obtained.
c. Disable auto-sensing function, force port to 10M full duplex
mode. 10M full-duplex will be obtained.
d. Disable auto-sensing, force port to 100M half duplex mode.
100M half-duplex will be obtained .
10M
Half duplex
port
a. Disable auto-sensing function, force port to 10M half duplex.
10M half duplex will be obtained.
10M
Full duplex
port
Disable auto-sensing function, force port to 10M full duplex. 10M
full duplex will be obtained.
10M
Auto-sensing
port
a. Enable auto-sensing (default) function, 100M full duplex will be
obtained.
100M
Half duplex
port
a. Disable auto-sensing function, force port to 100M half duplex
mode. 100M half-duplex will be obtained.
100M
Full duplex
port
a. ex-factory default function, 100M full duplex will be obtained.
100M
Auto-sensing
port
a. Enable auto-sensing function (default), 100M half-duplex will
be obtained.
b. Disable auto-sensing function, force port to 100M half duplex
mode. 100M half-duplex will be obtained.
Setting as shown:
OFF
Ex-factory default
setting 6
th
、
7
th
are
OFF
ON
6 7
6 7
OFF
ON
10M half duplex
6
th
: ON
7
th
: ON
10M full duplex
6
th
: ON
7
th
: OFF
OFF
ON
6 7
100M half duplex
6
th
: OFF
7
th
: ON
OFF
ON
6 7
10
