4
the water is below the water level sensor,it will automatically be protected and stop misting,at this
time the spray lights will flash. After adding the water above the water level sensor,it continues
misting.
4.At the beginning of the work, the atomization quantity may be small,it will be stable misting and
become large after working sometime.When the winter is coming,the weather will affect the
misting rate,you can put some hot water to speed its stable misting rate.
5.When you don’t use the mist maker for a long time,please make sure pull the transformer/adapter
input lead wires out,which can avoid the accident/ unfortunate happening.
四
:Matters Needing Attention,Services and Maintenance
1.Pls operate them accotding to our instructions. Check the input voltage of transformer(generator)
if it’s suitable your local voltage standard before using.
2.When the mist maker normally work,inevitable meeting produces certain heat caused by
temperature rise,at this time,we need to pour enough water in the container to heat eliminate.
Generally the volume of water should be greater than 30 litres(in order to ensure the mist maker
normally working,it should be enough water in the container,so pls make sure more than 30 litres
water in the container).
The bottom of mist maker can’t be less than 100mm high away from the container, or can’t be less
than 15 litres water in the container.This can improve the heat dissipation capacity,If the water
under the floating status or well elimination condition,the water will be reduced.
3.Please don’t be covered by sundries above the mist maker,and hold more than 100mm space of
the sprayer,also can’t put the atomizer in the sealed container.
4.Please don’t let the mist maker work under the high temperature water,when the temperature
exceed 50
℃
, the hyperthermia/ superheating protection can play the important part, the misting
will be stopped,only the indication light shines, when the water temperature is below 40
℃
, it will
normally continue working.It is not allowed to work under the freezing environment.
5.Please don’t put it beside the TV or other electric equipment ,avoid from damaging them when
the mist maker produces misting
6.Suited Transformer/Adapter/Generator should keep away from the sprayer, and the sprayer water
can spill out and make it wet directly,due to the plug which is connected to the sprayer can’t be put
it into the water or wet.
7.In order to ensure the mist maker/sprayer/atomizer normally working under the nice
