Beijing Rongda innovation Technology RD-FH5C5 Manual Download

Page: 48 / 61

RD-KT247 thermal printers

HTTP://WWW.RD-CN.COM

48 / 61

72 CODE93

255

127

73 CODE128

255

127

[Note]

•

When using the format 1 command, if the bar code type specifies the data length of

the bar code, k (the barcode data length received by the printer) should be equal to the

specified data length, and if not equal to the specified data length, the instruction is

invalid . See the related barcode data bit length [Appendix B].

•

The barcode data received by the printer should be included in the character set

specified by the bar code, if some characters of the bar code data characters are outside

the character set, the command is invalid. See the related barcode character set

[Appendix B].

•

When using the format 2 command, the value of n should be equal to the specified

data length (if the kind of bar code specifies the data bit length). And if the value of n is

not equal to the specified data bit length, the command is invalid. See the related

barcode data bit length [Appendix B].

•

The number of ITF code data length must be even numbers. If using the format 1 to

print ITF bar code, the value of k should be even numbers, but if it is odd number, the

last one bit data will be ignored. If using the format 2 to print ITF bar code, the value of

n should be even numbers, but if it is odd number, the last one bit data will be ignored.

•

If the bar code on the horizontal direction exceeds the printable area, it is invalid.

•

The command is not affected by the print modes (Eg: emphasized, double-strike print,

underline, character size, or white/black reverse printing, etc. )

•

Printing barcode need obey the barcode specifications, or will cause that the bar code

Summary of Contents for RD-FH5C5






























































Search results

Summary of Contents for RD-FH5C5

Reviews:

Related manuals for RD-FH5C5

Brands by name

Popular brands

Beijing Rongda innovation Technology RD-FH5C5, Manual

Search results

Summary of Contents for RD-FH5C5

Reviews:

Related manuals for RD-FH5C5

Brands by name

Popular brands