JetWave 4110L LoRa Gateway User Manual
Page 7
Device Setting
※
Noted that:
All devices are identical in the setting of frequency and RF BitRate.
All device settings are shown on as follows.
Frequency (Hz)
Setting transmit and receive frequency, the frequency range is 410MHz to 525MHz / 862MHz to
1020MHz.
Tx Power
Setting transmit power High (2W), Middle (1W), Low (0.5W).
Spreading Factor
Setting spreading factor, the range is 7~12.
The smaller the value, the greater the transmission rate
. **
Bandwidth (KHz)
Setting bandwidth, the range is 7.8~500 kHz. **
Equivalent Bitrate (bps)
Display equivalent bitrate, for reference only.
This value will change according to the Spreading Factor and
Bandwidth.
Receiver Sensitivity (dBm)
Display receiver sensitivity, for reference only.
This value will change according to the Spreading Factor
