Operation
26
Beijer Electronics, MA00824
The operator terminal will determine the user level from the entered password.
For instance, if the level of the password entered by the user is
1
, then the oper-
ator terminal will set the user level to1; if the level of the password entered by
the user is
2
, then the operator terminal will set the user level to 2.
User level 1
has the highest privilege and
User level 9
has the lowest.
Scenario 2: Re-entering a password
The object
Action Button
in H-Designer also allows the designer to create a but-
ton which asks the user to re-enter a password.
For example, by pressing the
button the password keypad will be displayed
to prompt the user to enter a password. After entering the password, the opera-
tor terminal will update the user level according to the most recent password
which has been entered. Therefore, this button can be applied to raise or drop
one’s privileges while the operator terminal is in operation.
How to configure an
Action Button
is described in the H-Designer User’s
Manual.
Note:
Only users of User Level 1 has the right of access to the password table.
