Operation
26
Beijer Electronics, MAEN834A
7.9 Copying an Application
To copy an application from one H-T100 to another H-T100, select
F3 - Copy
from the system menu. Set the dip switch
SW7 = ON
and connect the two
operator terminals with a download cable. After the self-test, the system menu
will be displayed on the screen.
Select
F3 - Copy
in the system menu from the operator terminal with the appli-
cation to be copied. The operator terminal will prompt for a password: enter the
password set in H-Designer from
Application/Workstation Setup
. Once the
correct password is entered, the H-T100 starts to copy the application to the
other H-T100.
For information about setting a password, please see section
The following appears on the screens during the copying:
Note:
If it is the first time to copy, please remember to run the application.
