GN-9371_2_3 User Manual
Page 56 of (110)
G-series GN-9371_2_3 PIO Rev. 1.02.docx
(7) At the Connection tap, click the Edit button. Input the PLC name. (*Refer the (4) section.)
Gateway IP address should be same as the PC IP address(gateway), the Port number should be 1217.
(8) TCP mode OPC configuration setting
If it is operated with TCP/IP mode, check the “Use TCP/IP blockdriver” tap and put the PLC IP address.
Set the PIO IP address into the PLC IP address. The PLC IP Port should be ‘11740’.
(9) Save and completion
After setting the all of OPC configurator stages, user should click the expert and save.
If it doesn`t work, OPC server will not be operated.
