Image and CODESYS update
5.3 iX Developer project status after
panel image update
On X2 pro, X2 extreme, X2 marine and X2 control, the iX Developer project is
unchanged after a panel image update is performed. If the panel image upgrade is
made over ethernet, an additional dialog will pop up to confirm an erasing of the
current iX Developer project. The default setting is not to erase the iX Developer
project.
5.4 Updating the CODESYS runtime
using ethernet
To update the CODESYS Runtime, the folder containing the CODESYS
.cab-files listed below must be specified in the Image Loader utility. The existing
Power Management- and EtherCAT Distributed Clock settings are shown in the
Image Loader utility, and can be set before updating the CODESYS Runtime.
Beijer Electronics, MAEN205G
22
