QnUDE Ethernet – X2/BoX2 series
SUEN00403 2020-10
2 (8)
N
o
rm
a
l.d
o
tm
,
2
02
0
-0
9
-0
9
1
Function and area of use
This document explains how to set up a QnUDE to communicate with X2/BoX2 over Ethernet.
2
About this Startup document
This Startup document should not be considered as a complete manual. It is an aid to be able to
Startup a normal application quickly and easily.
Use the following hardware, software, drivers and utilities in order to obtain a stable application:
In this document we have used following software and hardware
iX Developer 2.40 SP4 or later
X2/BoX2 series
GX Works 3
QnUDE CPU with built in Ethernet
For further information refer to
Beijer Electronics knowledge database, HelpOnline
This document and other Startup documents can be obtained from our homepage.
Please use the address
for feedback about our Quick Start
documents.
Copyright © Beijer Electronics, 2020
This documentation (below referred to as ‘the material’) is the property of Beijer Electronics. The holder or user has a non-
exclusive right to use the material.
The holder is not allowed to distribute the material to anyone outside his/her organization except in cases where the material is
part of a system that is supplied by the holder to his/her customer.
The material may only be used with products or software supplied by Beijer Electronics.
Beijer Electronics assumes no responsibility for any defects in the material, or for any consequences that might arise from the use of
the material.
It is the responsibility of the holder to ensure that any systems, for whatever applications, which is based on or includes the
material (whether in its entirety or in parts), meets the expected properties or functional requirements.
Beijer Electronics has no obligation to supply the holder with updated versions.
