Beijer Electronics korenix JetWave 3220v3 Series, User Manual

Page: 127 / 141

JetWave 3220v3/3420v3 Series User Manual
Page 118
5.2.3
List Command Set:
Type List + “Tab
↹
” to see all the command usage. This is similar to the Help command.
Below command is to list the remote configuration command line and its description.
korenixffffff>list remote
show set del keyword Description
----
---
--- ---------------------- -------------------------------
[X] [X] |-telnet --enable telnet
[X] [X] |-snmp --enable snmp
[X] [X] |-ssh --enable ssh
[X] [X] |-forcehttps --force https
[X] [X] |-snmptrap --enable snmp trap
[X] [X] |-email alter --enable email alert
[X] [X] |-event warning --event warning
[X] [X] | |-association --wlan association
[X] [X] | |-authentication --authentication fail
[X] [X] | `-config --config change
[X] [X] [X] `-smtp --smtp setting
[X] [X] |-sender --smtp sender
[X] |-server --smtp server
[X] [X] |-authType --authentication type
[X] [X] |-username --mail server username
[X] |-password --mail server password
[X] [X] [X] |-email1 --receiver 1 email
[X] [X] [X] `-email2 --receiver 2 email
show, set and del: Which privilege the command has? [X] means Yes.
Keyword: The command you should enter in the CLI.
Description: Short description of the usage of the command.
5.2.4
Delete Command Set: