Behringer Xair18, Manual

Page: 5 / 6

5
Audio Set Up Lab.
Below you find the basic initial audio setup with all possible features.
PC Line OUT-R
PC Line OUT-L
PC Line IN-R
PC Line IN-L
Phones Exp-R
Phones Exp-L
Behringer Input-3
Behringer Input-4 MIC IN Subject-1
MIC IN Subject-2
Behringer AUX-1
Behringer AUX-2
Behringer Control-L
Behringer Control-R
Phones Sub-1-L
Phones Sub-1-R
Behringer AUX-5
Behringer AUX-6
Behringer Input-1
Behringer Input-2
Phones Sub-2-L
Phones Sub-2-R
Behringer Main-L
Behringer Main-R
Behringer AUX-3
Behringer AUX-4
Speakers Cabin-L
Speakers Cabin-R
PC
Behringer
Behringer-1-setup TSG
Extra UTP Card in PC connection
IP: 192.168.1.101
Behringer set as DHCP server
IP: 192.168.1.1
Radboud University Nijmegen. FSW/TSG june 2017
USB 2.0 to USB PC connection
You can see that some of the mono inputs and outputs are combined into stereo inputs and outputs.
The initial setup in the research-labs will make use of the audio connections of the lab-computer and the
Behringer. The computer settings of the audio card make use of the Line-Output for presenting stimuli
and the Line-Input is set for audio responses and recordings.
In exceptional circumstances additional setting or features of the Behringer are needed. You can use the
Xair-mixer for this. Contact the TSG if this is the case.