2
ULTRAMIZER PRO DSP1424P
This symbol, wherever it appears, alerts
you to important operating and mainte-
nance instructions in the accompanying
literature. Read the manual.
SAFETY INSTRUCTIONS
CAUTION: To reduce the risk of electric shock, do not remove the
cover (or back). No user serviceable parts inside; refer
servicing to qualified personnel.
WARNING: To reduce the risk of fire or electric shock, do not expose
this device to rain or moisture.
DETAILED SAFETY INSTRUCTIONS:
All the safety and operation instructions should be read before the device is operated.
Retain Instructions:
The safety and operating instructions should be retained for future reference.
Heed Warnings:
All warnings on the device and in the operating instructions should be adhered to.
Follow instructions:
All operation and user instructions should be followed.
Water and Moisture:
The device should not be used near water (e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool etc.).
Ventilation:
The device should be situated so that its location or position does not interfere with its proper ventilation. For
example, the device should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation
openings, or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air
through the ventilation openings.
Heat:
The device should be situated away from heat sources such as radiators, heat registers, stoves, or other
devices (including amplifiers) that produce heat.
Power Source:
The device should be connected to a power supply only of the type described in the operating instructions or as
marked on the device.
Grounding or Polarization:
Precautions should be taken so that the grounding or polarization means of an device is not defeated.
Power-Cord Protection:
Power cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords and plugs, sockets, outlets and the point where they exit
from the device.
Cleaning:
The device should be cleaned only as recommended by the manufacturer.
Non-use Periods:
The power cord of the device should be unplugged from the outlet when left unused for a long period of time.
Debris and Liquid Entry:
Debris and/or liquids should not be allowed to enter the enclosure through openings.
Damage Requiring Service:
The device should be serviced by qualified service personnel when:
- The power supply cord or the plug has been damaged; or
- Debris or liquid has entered the device; or
- The device has been exposed to rain; or
- The device does not appear to operate normally or exhibits a marked change in performance; or
- The device has been dropped, or the enclosure damaged.
Servicing:
The user should not attempt to service the device beyond that which is described in the operating instructions.
All other servicing should be referred to qualified service personnel.
This symbol, wherever it appears,
alerts you to the presence of
uninsulated dangerous voltage inside
the enclosurevoltage that may be
sufficient to constitute a risk of shock.
All manuals and user guides at all-guides.com
