5
TUBE CONDENSER MICROPHONE T-47 User Manual
Set-up
3.
Mounting the microphone
The microphone comes with an elastic shockmount. The advantage to a
conventional microphone stand mount is that mechanically induced noise is
virtually absorbed.
To mount the microphone, attach the shockmount to the microphone stand
and, from above, slide the T-47 into the shockmount.
Caution
!
The provided shockmount is not intended to be used for
◊
suspending the T‑47!
Alternatively, you can also mount the T-47 on a microphone stand mount.
There is a screw adapter on the bottom side of the microphone.
Warming up
The T-47 can basically be used a couple of seconds after the PSU-T has been
switched on. However, the typical sound of the the T-47 only unfolds a while
after activating the power supply. We recommend allowing the microphone
to “warm up” 30 minutes before use.
