5
SONIC ULTRAMIZER SU9920
1. INTRODUCTION
Thank you for purchasing the SONIC ULTRAMIZER SU9920.
The SU9920 is a professional signal processor used to improve
the presence and liveliness of audio signals. For signal
processing a combination of a dynamic filter and a phase delay
algorithm is used. The latter is based on psychoacoustic
principles and guarantees improved sound characteristics
without unnatural side effects. The unit works with two
independent channels, so you can selectively process stereo or
two mono signals separately from each other. Whether you
purchased the SU9920 for your studio, live sound or the stage,
the unit's sound qualities are so impressive that you'll never
again want to do without this sound enhancer when mixing.
We at BEHRINGER hope you enjoy your new acquisition.
1.1 Before you get started
1.1.1 Shipment
Your product was carefully packed at the factory to ensure safe
transport. Nevertheless, if the box is damaged inspect the unit
immediately for signs of damage.
If the unit is damaged please do NOT return it to us,
but notify your dealer and the shipping company
immediately; otherwise, claims for damage or
replacement may not be granted.
We recommend that you use a flight case to give the
unit optimum protection during use or transport.
Always use the original box to prevent damage during
storage or transport.
Make sure that children cannot play unsupervised with
the unit or its packaging.
Please ensure proper disposal of all packing materials.
1.1.2 Initial operation
Ensure adequate air supply and to avoid overheating do not
place the unit near radiators etc.
Blown fuses must be replaced by fuses of the correct
rating! Please refer to the "SPECIFICATIONS" section
for the applicable rating.
For connection to the mains use the enclosed power cord with
cold connector which complies with the relevant safety
regulations.
Please make sure that all devices are properly
grounded. For your own safety, never remove or
disable the ground conductors from the devices or on
the power cords. The unit must always be connected
to the mains outlet with a protective grounding
connection.
The tone quality may diminish within the range of
powerful radio broadcasting stations and high-
frequency sources. Increase the distance between the
transmitter and the unit, and use shielded cables for
all connections.
1.1.3 Online Registration
Please register your new BEHRINGER equipment right after
your purchase by visiting http://www.behringer.com and read
the terms and conditions of our warranty carefully.
Should your BEHRINGER product malfunction, it is our intention
to have it repaired as quickly as possible. To arrange for warranty
service, please contact the BEHRINGER retailer from whom
the equipment was purchased.
Should your BEHRINGER dealer not be located in your vicinity,
you may directly contact one of our subsidiaries. Corresponding
contact information is included in the original equipment
packaging (Global Contact Information/European Contact
Information).
Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support
area of our website (http://www.behringer.com). Registering your
purchase and equipment with us helps us process your repair
claims more quickly and efficiently.
Thank you for your cooperation!
1. INTRODUCTION
01_DATA-MANFULL_SU9920_487_EN_Rev_A.pmd
19.04.2007, 14:43
5
