5
MONITOR SPEAKERS MS16
2. CONTROL ELEMENTS AND CONNECTIONS
2. CONTROL ELEMENTS AND CONNECTIONS
Left speaker
Right speaker
Fig. 2.1: Control elements and connections
MICROPHONE INPUT
(1/4" TRS). This connector allows you to connect your dynamic
microphone.
Turn the
MIC LEVEL
control to adjust the volume of your microphone. This control should
be set fully counterclockwise when connecting a microphone. When all connections are
made, slowly start raising gain.
BASS
control.
Turn the bass control to adjust the bass level.
TREBLE
control.
Turn the treble control to adjust the treble level.
Turn the
VOLUME
control to adjust the volume level of the devices connected to your MS16.
+
We would like to bring your attention to the fact that high volume levels may damage
your hearing and/or your headphones. Please turn the VOLUME CONTROL all the
way to the left before powering up the unit. Please always pay keen attention to an
appropriate volume level.
Connect your headphones via the
PHONES
output (1/8" TRS) to monitor any of the input
devices. When headphones are connected, the internal loudspeakers are automatically
switched off.
The
POWER
switch turns the unit on or off. The POWER switch should always be in the
Off position when you are about to connect your unit to the mains.
+
Please note that the POWER switch does not disconnect the device from the mains.
If the device is not in use for a long period of time, please disconnect it from the
mains by unplugging the power cord from the power socket.
The
POWER LED
lights up when power is switched on.
INPUT 1
(1/8" TRS) allows you to connect audio equipment such as CD/MD players.
