guitar link ucg102
22
Installation for Mac
If you do not have the serial number for the installed combo, you can only run the combo
+
in demo mode.
To setup the combo, proceed as follows:
Start the stand-alone application of a combo.
1)
In the
2)
Audio Setup
window, make your choice according to the screenshot.
Please note, when using the Guitar Combos plug-in inside a host application (for example,
3)
audio recording software such as energyXT2), all the signal routing is determined in the host
application.
As of OS 10.X the stand-alone version of Guitar Combos needs an "Aggregate Device"
+
for accessing inputs and outputs of the hardware. For more information on how to set
up an Aggregate Device, visit
.
