Behringer EUROPOWER PMP560M, Quick Start Manual

Page: 14 / 17

26 27 EUROPOWER PMP560M Quick Start Guide
EUROPOWER PMP560M FX Parameter Chart
# Preset Name Parameter 1 7 Seg Display Range # Preset Name Parameter 2 7 Seg Display LED Range
01 Hall Decay 1 .. 30 2.0 .. 6.0 s (SMALL) / 2.0 .. 10.0 s (LARGE) 01 Hall Size S / L OFF / ON SMALL / LARGE
02 Concert Decay 1 .. 30 0.3 .. 3.0 s (SMALL) / 0.5 .. 4.0 s (LARGE) 02 Concert Size S / L OFF / ON SMALL / LARGE
03 Room Decay 1 .. 30 0.2 .. 3.0 s (SMALL) / 0.3 .. 4.0 s (LARGE) 03 Room Size S / L OFF / ON SMALL / LARGE
04 Chamber Decay 1 .. 30 0.1 .. 0.6 s (SMALL) / 0.2 .. 1.2 s (LARGE) 04 Chamber Size S / L OFF / ON SMALL / LARGE
05 Rich Plate Decay 1 .. 30 0.2 .. 2.0 s (SMALL) / 0.5 .. 4.0 s (LARGE) 05 Rich Plate Size S / L OFF / ON SMALL / LARGE
06 DigiVerb Decay 1 .. 16 0.4.. 4.5 s 06 DigiVerb Size r / F OFF / ON REAR / FRONT
07 Ambience Size 1 .. 30 SMALL / LARGE 07 Ambience Tail-Gain oF / on OFF / ON OFF / ON
08 Gated Size 1 .. 12 SMALL / LARGE 08 Gated Type AL / Gt OFF / ON ALIVE / GATED
09 Reverse Size 1 .. 20 SMALL / LARGE 09 Reverse Brightness oF / on OFF / ON DARK (OFF) / BRIGHT (ON)
10 Delay Feedback 1 .. 20 0 .. 100% 10 Delay Delay Time (TAP) BPM * TAP SPEED * 120 .. 838 ms (500 .. 72 BPM)
11 Ping Pong Feedback 1 .. 20 0 .. 100% 11 Ping Pong Delay Time (TAP) BPM * TAP SPEED * 121 .. 838 ms (500 .. 72 BPM)
12 Echo Feedback 1 .. 20 0 .. 100% 12 Echo Delay Time (TAP) BPM * TAP SPEED * 122 .. 838 ms (500 .. 72 BPM)
13 Tape Echo Feedback 1 .. 20 0 .. 100% 13 Tape Echo Delay Time (TAP) BPM * TAP SPEED * 123 .. 838 ms (500 .. 72 BPM)
14 Detune Detune 1 .. 99 1 .. 99 Cent 14 Detune Predelay oF / on OFF / ON 5 ms (OFF) / 50 ms (ON)
15 Pitch Pitch -12 .. -1 / 1 .. 12 -12 .. +12 Semitones 15 Pitch Add 25 Cent oF / on OFF / ON +0 Cents (OFF) / +25 Cents (ON)
16 Chorus Depth -9 .. -1 / 1 .. 9 -9 .. -1 (LFO Sine) 1 .. 9(LFO Triangle) 16 Chorus LFO Speed (TAP) BPM * TAP SPEED * 200 .. 4000 ms (300 .. 15 BPM)
17 Flanger Depth -9 .. -1 / 1 .. 9 -9 .. -1 (LFO Negative Feedback) 1 .. 9 (LFO Positive Feedback) 17 Flanger LFO Speed (TAP) BPM * TAP SPEED * 200 .. 4000 ms (300 .. 15 BPM)
18 Phaser Depth -9 .. -1 / 1 .. 9 -9 .. -1 (Stereo) / 1 .. 9 (Mono) 18 Phaser LFO Speed (TAP) BPM * TAP SPEED * 200 .. 4000 ms (300 .. 15 BPM)
19 Tremelo Depth -9 .. -1 / 1 .. 9 -9 .. -1 (Square) / 1 .. 9 (Triangle) 19 Tremelo LFO Speed (TAP) BPM * TAP SPEED * 120 .. 1200 ms (500 .. 50 BPM)
20 Panner Depth -9 .. -1 / 1 .. 9 -9 .. -1 (Square) / 1 .. 9 (Triangle) 20 Panner LFO Speed (TAP) BPM * TAP SPEED * 120 .. 1200 ms (500 .. 50 BPM)
21 Delay & Reverb Balance -9 .. -1 / 1 .. 9 90:10 .. 10:90 % 21 Delay & Reverb Delay Time (TAP) BPM * TAP SPEED * 120 .. 523 ms (500 .. 115 BPM)
22 Chorus & Reverb Balance -9 .. -1 / 1 .. 9 90:10 .. 10:90 % 22 Chorus & Reverb Reverb Decay S / L OFF / ON SHORT (1.2 s) / LONG (2.4 s)
23 Pitch & Reverb Pitch -12 .. -1 / 1 .. 12 -12 .. +12 Semitones 23 Pitch & Reverb Reverb Decay S / L OFF / ON SHORT (1.2 s) / LONG (2.4 s)
24 Chorus & Delay Balance -9 .. -1 / 1 .. 9 90:10 .. 10:90 % 24 Chorus & Delay Delay Time (TAP) ** BPM * TAP SPEED * 120 .. 800 ms (500 .. 75 BPM)
25 Flanger & Delay Balance -9 .. -1 / 1 .. 9 90:10 .. 10:90 % 25 Flanger & Delay Delay Time (TAP) ** BPM * TAP SPEED * 120 .. 800 ms (500 .. 75 BPM)
* The 7-segment LED display represents the hundreds and tens of the TAP SPEED in BPM (Beats Per Minute). If the TAP SPEED is too low or too high “Lo” or “HI” is displayed and the Delay Time or LFO (Low Frequency Oscillator) rate parameter is set to the lower or upper limit of the parameter range.
** The TAP SPEED also affects the LFO rate of the modulation effect (Chorus, Flanger)