background image

3

EURODESK SX3242FX/SX2442FX User Manual

LEGAL DISCLAIMER

LIMITED WARRANTY

Terminals marked with this symbol carry 

electrical current of suffi  cient magnitude 
to constitute risk of electric shock. 

Use only high-quality professional speaker cables with 
¼" TS or twist-locking plugs pre-installed. All other 
installation or modifi cation should be performed only 
by qualifi ed personnel.

This symbol, wherever it appears, 

alerts you to the presence of uninsulated 
dangerous voltage inside the 

enclosure - voltage that may be suffi  cient to constitute a 
risk of shock.

This symbol, wherever it appears, 

alerts you to important operating and 
maintenance instructions in the 

accompanying literature. Please read the manual.

Caution

To reduce the risk of electric shock, do not 
remove the top cover (or the rear section). 

No user serviceable parts inside. Refer servicing to 
qualifi ed personnel.

Caution

To reduce the risk of fi re or electric shock, 
do not expose this appliance to rain and 

moisture. The apparatus shall not be exposed to dripping 
or splashing liquids and no objects fi lled with liquids, 
such as vases, shall be placed on the apparatus.

Caution

These service instructions are for use 
by qualifi ed service personnel only. 

To reduce the risk of electric shock do not perform any 
servicing other than that contained in the operation 
instructions. Repairs have to be performed by qualifi ed 
service personnel.

1. 

Read these instructions.

2. 

Keep these instructions.

3. 

Heed all warnings.

4. 

Follow all instructions.

5. 

Do not use this apparatus near water.

6. 

Clean only with dry cloth.

7. 

Do not block any ventilation openings. Install in 

accordance with the manufacturer’s instructions.

8. 

Do not install near any heat sources such as 

radiators, heat registers, stoves, or other apparatus 
(including amplifi ers) that produce heat.

9. 

Do not defeat the safety purpose of the polarized 

or grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding-type plug 
has two blades and a third grounding prong. The wide 
blade or the third prong are provided for your safety. If the 
provided plug does not fi t into your outlet, consult an 
electrician for replacement of the obsolete outlet.

10.  

Protect the power cord from being walked on or 

pinched particularly at plugs, convenience receptacles, 
and the point where they exit from the apparatus.

11.  

Use only attachments/accessories specifi ed by 

the manufacturer.

12.  

Use only with the 

cart, stand, tripod, bracket, 
or table specifi ed by the 
manufacturer, or sold with 
the apparatus. When a cart 
is used, use caution when 
moving the cart/apparatus 
combination to avoid 

injury from tip-over.

13.  

Unplug this apparatus during lightning storms or 

when unused for long periods of time. 

14.  

Refer all servicing to qualifi ed service personnel. 

Servicing is required when the apparatus has been 
damaged in any way, such as power supply cord or plug 
is damaged, liquid has been spilled or objects have fallen 
into the apparatus, the apparatus has been exposed 
to rain or moisture, does not operate normally, or has 
been dropped.

15.  

The apparatus shall be connected to a MAINS socket 

outlet with a protective earthing connection.

16.  

Where the MAINS plug or an appliance coupler is 

used as the disconnect device, the disconnect device shall 
remain readily operable.

TECHNICAL SPECIFICATIONS AND APPEARANCES 
ARE SUBJECT TO CHANGE WITHOUT NOTICE AND 
ACCURACY IS NOT GUARANTEED. BEHRINGER IS 
PART OF THE MUSIC GROUP (MUSIC-GROUP.COM). 
ALL TRADEMARKS ARE THE PROPERTY OF THEIR 
RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO 
LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED 
BY ANY PERSON WHO RELIES EITHER WHOLLY OR 
IN PART UPON ANY DESCRIPTION, PHOTOGRAPH 
OR STATEMENT CONTAINED HEREIN. COLORS AND 
SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. 
MUSIC GROUP PRODUCTS ARE SOLD THROUGH 
AUTHORIZED FULLFILLERS AND RESELLERS ONLY. 
FULLFILLERS AND RESELLERS  ARE NOT AGENTS OF 
MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY 
TO BIND MUSIC GROUP BY ANY EXPRESS OR IMPLIED 

UNDERTAKING OR REPRESENTATION. THIS MANUAL 
IS COPYRIGHTED. NO PART OF THIS MANUAL MAY 
BE REPRODUCED OR TRANSMITTED IN ANY FORM 
OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, 
INCLUDING PHOTOCOPYING AND RECORDING OF ANY 
KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS 
WRITTEN PERMISSION OF MUSIC GROUP IP LTD.

ALL RIGHTS RESERVED. 
© 2012 MUSIC Group IP Ltd.
Trident Chambers, Wickhams Cay, P.O. Box 146,
Road Town, Tortola, British Virgin Islands

§ 1 Warranty

(1) 

This limited warranty is valid only if you purchased 

the product from a MUSIC Group Authorized Reseller in 
the country of purchase. A list of authorized resellers can 
be found on BEHRINGER’s website behringer. com under 
“Where to Buy”, or you can contact the MUSIC Group offi  ce 
closest to you.

(2) 

MUSIC Group* warrants the mechanical and 

electronic components of this product to be free of defects 
in material and workmanship if used under normal 
operating conditions for a period of one (1) year from 
the original date of purchase (see the Limited Warranty 
terms in § 4 below), unless a longer minimum warranty 
period is mandated by applicable local laws. If the product 
shows any defects within the specifi ed warranty period 
and that defect is not excluded under § 4, MUSIC Group 
shall, at its discretion, either replace or repair the product 
using suitable new or reconditioned product or parts. 
In case MUSIC Group decides to replace the entire product, 
this limited warranty shall apply to the replacement 
product for the remaining initial warranty period, i.e., 
one (1) year (or otherwise applicable minimum warranty 
period) from the date of purchase of the original product.

(3) 

Upon validation of the warranty claim, the repaired 

or replacement product will be returned to the user 
freight prepaid by MUSIC Group. 

(4) 

Warranty claims other than those indicated above 

are expressly excluded. 
PLEASE RETAIN YOUR SALES RECEIPT. IT IS YOUR PROOF 
OF PURCHASE COVERING YOUR LIMITED WARRANTY. 
THIS LIMITED WARRANTY IS VOID WITHOUT SUCH PROOF 
OF PURCHASE.

§ 2 Online registration

Please do remember to register your new BEHRINGER 
equipment right after your purchase at behringer. com 
under “Support” and kindly read the terms and conditions 
of our limited warranty carefully. Registering your 
purchase and equipment with us helps us process 
your repair claims quicker and more effi  ciently. 
Thank you for your cooperation! 

§ 3 Return materials authorization

(1) 

To obtain warranty service, please contact the 

retailer from whom the equipment was purchased. 
Should your MUSIC Group Authorized Reseller not be 
located in your vicinity, you may contact the MUSIC Group 
Authorized Fulfi ller for your country listed under 

Important Safety 

Instructions

Summary of Contents for Eurodesk SX2442FX





















Reviews: