background image

EURODESK SL3242FX-PRO/SL2442FX-PRO

 

2

Important Safety Instructions

This symbol, wherever it appears, alerts you to the 

 

*

presence of uninsulated dangerous voltage inside the 

enclosure - voltage that may be sufficient to constitute 

a risk of shock.

This symbol, wherever it appears, alerts you to im-

 

!

portant operating and maintenance instructions in the 

accompanying literature.  Please read the manual.

Caution

To reduce the risk of electric shock, do not remove the 

 

+

top cover (or the rear section).  No user serviceable parts 

inside.  Refer servicing to qualified personnel.

Caution

To reduce the risk of fire or electric shock, do not expose 

 

+

this appliance to rain and moisture.  The apparatus shall 

not be exposed to dripping or splashing liquids and no 

objects filled with liquids, such as vases, shall be placed 

on the apparatus.

Caution

These service instructions are for use by qualified ser

-

 

+

vice personnel only.  To reduce the risk of electric shock 

do not perform any servicing other than that contained in 

the operation instructions. Repairs have to be performed 

by qualified service personnel.

Read these instructions.

1) 

Keep these instructions.

2) 

Heed all warnings.

3) 

Follow all instructions.

4) 

Do not use this apparatus near water.

5) 

Clean only with dry cloth.

6) 

Do not block any ventilation openings.  Install in accor-

7) 

dance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, 

8) 

heat  registers,  stoves,  or  other  apparatus  (including 

amplifiers) that produce heat.

Do  not  defeat  the  safety  purpose  of  the  polarized  or 

9) 

grounding-type plug.  A polarized plug has two blades 

with  one  wider  than  the  other.   A  grounding-type  plug 

has two blades and a third grounding prong.  The wide 

blade or the third prong are provided for your safety.  If 

the provided plug does not fit into your outlet, consult an 

electrician for replacement of the obsolete outlet.

Place the power cord so that it is protected from being 

10) 

walked on and sharp edges. Be sure that the power cord is 

protected particularly at plugs, convenience receptacles 

and the point where it exits from the apparatus.

The  apparatus  shall  be  connected  to  a  MAINS  socket 

11) 

outlet with a protective earthing connection.

Where the MAINS plug or an appliance coupler is used 

12) 

as  the  disconnect  device,  the  disconnect  device  shall 

remain readily operable.
Use  only  attachments/accessories  specified  by  the 

13) 

manufacturer.

Use  only  with  the  cart,  stand,  tripod,  bracket,  or  table 

14) 

specified by the manufacturer, or sold with the apparatus.  

When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

Unplug this apparatus during lightning storms or when 

15) 

unused for long periods of time.

Refer all servicing to qualified service personnel.  Servic

-

16) 

ing is required when the apparatus has been damaged in 

any way, such as power supply cord or plug is damaged, 

liquid has been spilled or objects have fallen into the appa-

ratus, the apparatus has been exposed to rain or moisture, 

does not operate normally, or has been dropped.

Summary of Contents for Eurodesk SL2442FX-Pro


















Reviews: