(EN)
Step 2: Controls
(11)
(12)
(1) (2)
(3)
(4)
(7)
(8)
(6)
(10)
(5)
(9)
(11)
(12)
(1) (2)
(3)
(4)
(7)
(8)
(6)
(10)
(5)
(9)
(1)
POWER
switch turns the unit
on and off.
(2)
THRESHOLD
knob determines
the level at which the signal
will be reduced in dynamics.
(3)
LEVELER
knob compensates for
varying levels in the program
material in order to achieve a
consistent compression.
(4)
RATIO
knob determines the
ratio between the input and
output levels for all signals
exceeding the threshold point.
The control range can be
adjusted from 1:1 to 6:1.
(5)
PROGRAM
button optimizes
the crossover frequency of the
two bands for either music
(500 Hz) or speech (2 kHz).
(6)
GAIN REDUCTION
meter
indicates the current gain
reduction for each band.
(7)
OUTPUT
knob allows the
output signal to be increased
or decreased to compensate
for level loss due to the
compression or limiting.
(8)
LIMITER
knob sets the point
by which the output signal
is not allowed to go beyond.
The HI and LO LEDs will
light to indicate activity by
either limiter.
(9)
METER
button determines
whether the LEVEL meter
displays the input or
output level.
(10)
LEVEL
meter displays either
the input or output level,
depending on the position of
the METER button.
(11)
OUTPUT
A and B send the
processed signal via XLR or
Euroblock connectors.
(12)
INPUT
A and B accept signals
to be processed via XLR, 1/4",
or Euroblock connectors.
EUROCOM SPL3220 Controls
10
EUROCOM SPL3220
11
Quick Start Guide
