background image

2. 

 Insert the 16-pin connector on the power cable into the 

socket on the power supply or rack case. The connector has 

a tab that will align with the gap in the socket, so it cannot 

be inserted incorrectly. If the power supply does not have 

a keyed socket, be sure to orient pin 1 (-12 V) with the red 

stripe on the cable.

3. 

 Insert the 10-pin connector into the socket on the back of 

the module. The connector has a tab that will align with the 

socket for correct orientation.

4. 

 After both ends of the power cable have been securely 

attached, you may mount the module in a case and turn on 
the power supply.

Installation

The necessary screws are included with the module for mounting 

in a Eurorack case. Connect the power cable before mounting.
Depending on the rack case, there may be a series of fixed holes 

spaced 2 HP apart along the length of the case, or a track that 

allows individual threaded plates to slide along the length of the 

case. The free-moving threaded plates allow precise positioning 

of the module, but each plate should be positioned in the 

approximate relation to the mounting holes in your module before 

attaching the screws.
Hold the module against the Eurorack rails so that each of the 

mounting holes are aligned with a threaded rail or threaded 

plate. Attach the screws part way to start, which will allow small 

adjustments to the positioning while you get them all aligned. 

After the final position has been established, tighten the  

screws down.

Specifications

Inputs

EQ input

Type

3.5 mm TS jack, AC coupled

Impedance

40 kΩ, unbalanced

Max input level

+18 dBu

Mixer input

Type

4 x 3.5 mm TS jacks, AC coupled

Impedance

> 25 kΩ, unbalanced

Max input level

+21 dBu

Outputs

EQ output

Type

2 x 3.5 mm TS jacks, DC coupled

Impedance

330 Ω, unbalanced

Max output level

+18 dBu

Noise with EQ set flat

< -90 dBu, 22 Hz to 22 kHz

Master output

Type

2 x 3.5 mm TS jacks

2 x ¼" TS jacks

AC coupled   

Impedance

700 Ω, unbalanced

Max output level

+8 dBu

Noise with 1 channel open

< -100 dBu, 22 Hz - 22 kHz

Phones output

Type

3.5 mm TRS stereo jack, AC coupled

Impedance

50 Ω, unbalanced

Max output level

+18 dBu

Controls

EQ level

±12 dB, 0 dB center detent

EQ bandwidth Q range

0.9 to 9

EQ frequency range 1

20 Hz to 200 Hz

EQ frequency range 2

100 Hz to 1 kHz

EQ frequency range 3

500 Hz to 5 kHz

EQ frequency range 4

2 kHz to 20 kHz

EQ bypass switch

Off / on

OSC frequency switch

Off / 220 Hz / 440 Hz / 880 Hz

OSC mix level

-∞ to unity gain

Mixer input fader

-∞ to unity gain

Mixer panpot

-∞ to unity gain, -3 dB center detent

Master volume

-∞ to -10 dBu

Phones level

-∞ to +10 dBu

Power

Power supply

Eurorack

Current draw

120 mA (+12 V), 100 mA (-12 V)

Physical

Dimensions

53 x 122 x 129 mm (2.1 x 4.8 x 

5.1")

Rack units

24 HP

Weight

0.28 kg (0.62 lbs)

LEGAL DISCLAIMER

Music Tribe accepts no liability for any loss which may be suffered by any 

person who relies either wholly or in part upon any description, photograph, 

or statement contained herein. Technical specifications, appearances and 

other information are subject to change without notice. All trademarks are 

the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, 

Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, 

Auratone and Coolaudio are trademarks or registered trademarks 

of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 

2020 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and  

additional information regarding Music Tribe’s  

Limited Warranty, please see complete details online  

at musictribe.com/warranty. 

Reviews: