– 10 –
behr InKjel P
142109
Configuring the InKjel P to meet your
needs
You can, in fact, use your InKjel P for analyses right
now. You should, however, take a couple of minutes to
perform one or two settings.
These settings can, of course, also be made or modified
at a later time.
This screen will appear when the unit is switched on:
Prog 01/01
==>>
START
EIN
- -
Turn the operating button until the ==>> menu item
is indicated and then press the button. The following
menu will appear:
GERAET
PROGRAMM
<<== zurück
01
Select the
Geraet (Device)
menu item.
You will then move to a menu consisting of two
pages.
Select the required entry by turning the operating but-
ton if you wish to change a setting. Press the button to
select the entry and set the required value by turning the
button. Store the value by pressing the operating button
again.
The Start menu
1 If no program is running, but a starting time has been
selected, the starting time is displayed here.
This box is otherwise blank.
2
Start
menu item: The temperature program most
recently selected starts if this menu item is selected.
What program this is is1 indicated at bottom left.
3
Preheat ON/OFF
menu item: if this item is selected,
the InKjel P will preheat with the heating power that
corresponds to the heating power of the first step of
the heating program currently selected. The menu
item will then change to
OFF
. Select
OFF
in order to
switch the heating function off again.
4 The program currently selected, and the program
step reached, are indicated here.
5
Continue
menu item: select this menu item to access
other possible settings. You can
-
select another program
-
write a new program
-
configure the unit to your needs
Prog 01/01
14:05
==>>
START
ON
- -
2
1
5
4
3