Behmor 2000AB, Operation Manual

Page: 9 / 21

V22 Gen 2000AB 120v 8
*** New running out of time Beeper Feature- :15 left you will hear a loud “BEEPING” 5-times to warn you the
roast is about to end.
Many questions can be answered by visiting our Knowledge Base at: https://behmor.com/knowledge-base/
Select and Set Roasting Profile (All First-time Users and Beginners):
Auto Mode Profiles:
Profile P1 (Default) - Hard Bean (Highest Heat Profile)
All Centrals, Peruvian and Colombians
Press appropriate weight button (1/4, 1/2, to 1), then press Start button
Profile P2 - Hard Bean
All Centrals, Peruvian and Colombians
Press appropriate weight button (1/4, 1/2, to 1), then press P2 button, then press Start button
Profile P3 – Soft Bean, Low Grown, Espresso Blend
Brazilians, Africans, Southeast Asians, Malabar*, Jamaican Blue Mountain and Yauco Selecto
(Puerto Rican)
Press appropriate weight button (1/4, 1/2, to 1) then press P3 button, then press Start button
Profile P4 – Soft Bean, Low Grown, Espresso Blends
Kona and other low grown island coffees (P4 just into 2
nd
crack, and P5 for shy of 2
nd
crack)
Press appropriate weight button (1/4, 1/2, to 1), then press P4 button, then press Start button
Profile P5 - Hawaiian/ Island Coffees- City/City+ (Lowest Heat Profile)
Kona and other low grown island coffees (P4 just into 2
nd
crack, and P5 for shy of 2
nd
crack)
Press appropriate weight button (1/4, 1/2, to 1), then press P5 button, then press Start button
Examples:
Roasting times will vary according to voltage, profile setting. When using settings P3-P5 users will need to add
time via either the “C” or +/- buttons.
We strongly urge users to utilize the button (pages 9, 10, 12 and 13), as it allows the user to reset and
extend time in larger increments, and addresses the unattended feature as well.
See further data on Pages 11, 12 and 13 - “Part 5: Tips” on voltage/ time and FAQ, pages 16 and 17