Behmor 1600, Operation Manual

Page: 11 / 22

V21 SR Plus V7.2 EU.C 10
Behmor 2020SR Plus Control Panel Features & Auto-Safety Shutoff (Err 7) w/ Beeper*
The new program,
once a roast cycle is begun,
gives you the ability to:
1) Read thermistors by pressing
A (exhaust channel temp once exhaust fan is active mid-roast) or B (chamber
wall temp)
** These temps ARE NOT bean temps and for information
/correlation purposes only. Never gauge degree of roast based on these temps
2) Reset time to Rosetta Stone times (Part V Paragraph 3 manual) – C button
3) Change motor speed ( D button) *must be in Manual mode
4) Change power to the elements in increments :
P1 P2 P3 P4* P5*
0% 25% 50% 75%
100
%
5) Auto Safe / Unattended switch – a safety feature that requires user interaction
otherwise an
err7 message will appear.
Auto Safety/Unattended Shutoff Feature (Err 7)
At 75% into any roast, based on standard system default times* the timer will start blinking un:30 ..29, 28
etc., with loud BEEPING sound to advise the user they have 30 seconds to press START otherwise it will
automatically go into cool flashing err7 . This is a required safety feature in both Automatic or Manual
Modes.
Rosetta Stone "C" Button Feature (for more details and Tips see pages 10, 13 and 14)
Press C (for crack as in first
) and it will reset the timer according to weight as per our “Rosetta Stone”
times which are associated with approximate time it takes to go from the first crack of 1C to start of 2C. It is
merely an approximation but provides users better understanding of where they are in the final stages of a
roast cycle.
Manual Mode
Begin a roast (Weight – desired, then Press Start), once a roast has begun at any point press either P1 - P5 to go
into Manual mode
1) Press P1 - P5 to change power- whatever is pressed “blinks” to denote which setting
a) P1 – P3 recommended settings for finishing a roast
b) P4 - P5 recommended for use ONLY in early (drying) phases of a roast, using P4 – P5 after beginning
of 1C (first crack) when combined with bean mass heat will likely lead to bean scorching
c)
2) Change Motor speed – press D (drum)
3) Reset time to weight (Rosetta Stone) – press C
4) Press 400 at any time to return to Auto Mode (Auto mode runs simultaneously with Manual Mode- should
you toggle back to Auto the time left/ roast cycle will be the same as when you left Manual mode)