background image

F-21317 7  8-13-20

Cleaning And 

Storage

After Each Use

• 

Remove large debris such as clumps of dirt, 

grass, crop residue, etc. from Land Plane.

• 

Inspect Land Plane and replace worn or 

damaged parts

• 

Replace any safety decals that are missing or 

not readable.

Before Extended Storage

• 

Follow cleaning instructions from above.

• 

Wash implement using low-pressure water 

spray.

• 

Be careful when spraying near scratched or torn 

safety decals or near edges of decals as water 

spray can peel decals off surface. 

• 

Spraying near chipped or scratched paint can 

also cause paint to peel more.

• 

Inspect implement for worn or damaged parts 

and replace any missing safety stickers.

• 

Sand down scratches and edges where paint is 

missing and repaint to prevent rust.

• 

Store the implement in a shed or under a 

tarpaulin to protect it from the weather. The 

blade should be resting on boards or some 

other object. Keep out of soil when storing.

• 

Store in clean, dry place away from human 

activity or livestock.

WARRANTY

This unit carries a 1 year warranty, with the 

exception of wear parts. Dated proof of purchase 

required on all claims.

Summary of Contents for 80119070YEL










Reviews: