How to Customize the Vibration Signal *
You can adjust three properties of the vibration signal.
•
STRENGTH determines the intensity of the vibration signal
•
LENGTH determines how long each vibration signal lasts
•
PULSE determines whether each vibration signal consists of a continuous vibration (Pulse
OFF
) or distinct < 1 second pulses (Pulse
ON
).
To change the SIGNAL settings, from the HOME screen, press and release M, then use the +> key
t
o reach SIGNAL. Press SEL, and you’ll see the first signal property, STRENGTH, on the screen.
Use the +> key to reach the other two properties. With any property you wish to change on the
screen, press SEL, then use the Scroll keys until the level or value you want is blinking, then press
SEL to save that level or value.
To make it easier to configure the vibration to your liking, you can preview the effect that any
changes you make will have on the vibration. Just press and release the TEST key to immediately
get a vibration signal that reflects all your current SIGNAL settings.
CONTENTS
Orientation and Operating Basics
Advanced Settings: An Overview
How to Change the Interval Type *
How to Customize the Vibration Signal *
How to Change What Appears on The Screen During
Prompting *
*
How to Restore All Original Settings *
How to Prevent Unwanted Access to Advanced Settings *
How to Pause and Resume Prompting *