ENGLISH
OPERATION
MANUAL
JB SYSTEMS
2/20
LC1 LASER CONTROLLER
FUNCTIONS
1. KEY-ACTUATED POWER SWITCH:
Used to put the laser controller in sleep
mode, only to be used by authorized personnel. When the controller is switched
off, the connected laser goes automatically in blackout.
2. BLACKOUT BUTTON:
Used to put the connected laser in blackout, without
shutting it off.
3. CONVERSION BUTTON:
Works only in one of the manual modes! The shape of
a selected pattern can be stretched in both horizontal and/or vertical direction.
The speed of the conversions can be adapted with the speed fader(8).
•
Horizontal conversion:
press the button 1 time
Æ
the left led turns on. The
selected pattern will be stretched in horizontal direction.
•
Vertical conversion:
press the button a second time
Æ
the right led turns
on. The selected pattern will be stretched in vertical direction.
•
Horizontal and vertical conversion:
press the button a third time
Æ
both
leds are lit. The selected pattern will be stretched in both directions.
•
No conversion:
press the button a fourth time
Æ
both leds turn off. The
shape of the selected pattern won’t change anymore.
