9.
Wiring Diagram 1 - 120VAC Connections
Normally-On Operation
- Fixtures remain illuminated in AC and emergency operating modes.
See “
A”
in
Wiring Diagram 1
for 120V wiring or “
F”
in
Wiring Diagram 2
for 277V wiring.
Normally-Off Operation
- Fixtures illuminate only upon loss of utility AC power.
See “
B”
in
Wiring Diagram 1
for 120V wiring or “
G”
in
Wiring Diagram 2
for 277V wiring.
Normally-On and Normally-Off Operation
- A combination of the operating modes described above.
See “
C”
in
Wiring Diagram 1
for 120V wiring or “
H”
in
Wiring Diagram 2
for 277V wiring.
Switched Load Operation
- Single Circuit
- Fixtures can be externally switched and will illuminate
upon loss of utility AC power regardless of external switch position.
See “
D”
in
Wiring Diagram 1
for 120V wiring or “
I”
in
Wiring Diagram 2
for 277V wiring.
Switched Load Operation - Four Circuit (-4C Option)
- Functionally identical to the Switched Load
Operation above but provides for the operation of up to four individually switched output circuits.
See “
E”
in
Wiring Diagram 1
for 120V wiring or “
J”
in
Wiring Diagram 2
for 277V wiring.
A)
B)
C)
D)
– Func-
tionally identical to the Switch Load Operation above, but provides four (4) independent settings
for each of the two dimmable loads.
See
“
N
” in
(See Wiring Diagram "
O
" for details on dimming switch field programming)
Diagram "
O
" in Wiring Diagram 3 can be used for both 120V or 277V wiring and setting of the
"
G
" in Wiring Diagram 1