Beghelli U.S.A., 3250 Corporate Way, Miramar, Florida, Tel: (800) 726-4316 Tel: (954) 442-6600 Fax: (954) 442-6677
8/6/2019
Page 2 of 2
To test, depress test switch. The emergency lamps will illuminate.
When switch is released, LED will go off. Allow unit to charge for 48
hours before full load testing.
Battery: 3.6V 1000mAh Ni-Cd
LED: 2X12PCS SMDLED
Duration time: 100 minutes
1.
1.
2.
3.
TESTING
IMPORTANT NOTICE:
This equipment is furnished with a low voltage disconnect circuit to prevent damage by over discharging the
battery. However, if the AC supply to the unit is to be disconnected for prolonged periods of time, the BATTERY MUST BE DISCONNECTED.
If unit fails to perform as described, disconnect AC and battery immediately, and contact the factory, or trained service personnel for
assistance.
TECHNICAL PARAMETERS
WARNING:
Unused wires must be capped using enclosed wire nuts.
