11
User Setting Options
Your scale has four additional settings that you may customize for your
specific needs. They are:
Tone on/off:
A tone sounds whenever a weight is locked in or a button is
pressed. (Factory setting = 1 is “on”.) 0 = tone off.
LB/KG lock:
The LB/KG button can be disabled so that the scale will weigh in
only the selected unit of measure. (Factory setting = 1 is “unlocked”.)
0 = locked.
Note:
When setting the weight mode lock, make sure the scale is in the
mode you want locked before proceeding.
Always-On mode:
The scale may be set up so that the
ON
button need not
be pressed to turn on the scale. This can save valuable time in certain
situations. The downside is that the batteries will be depleted faster - battery
life will be approximately 1.5 years when the scale operates in this mode.
When Auto-On mode is enabled, the scale’s display will not turn off and the
Always-On symbol will display (oval in the top right corner of LCD display).
Height Display Format:
When measuring weight in pounds, height may be
displayed in feet & inches (5’ 6.2”) or in inches (66.2”). When weight is in
kilograms, height always displays in centimeters.
To change any (or all) of these settings:
1. Depress
ON/ZERO
button and wait for the scale to display “0.0”.
2. Hold
MENU
button down and depress
RECALL
button. “Set-0” will
be displayed and the “0” will be flashing.
3. Depress the button repeatedly until “Set-5” appears. Depress
the
ENTER
button.
4. “A1101” will display with the left most “1” flashing. This sets the
Tone: “1” = on, “0” = off. Use the and buttons to input your
desired setting. Press
ENTER
.
5. The second position will now be flashing. This disables the LB/KG
button: “1” = unlocked, “0” = locked out. Again use the and
buttons to input your desired setting. Press
ENTER
.
6.
The third position will now be flashing. This enables/disables the
“Always-On” mode: “1” = always on, “0” = normal operation. Use
the and buttons to input your desired setting. Press
ENTER
.
Note: If the optional 120V AC adapter is used to power the scale,
the scale will remain on at all times regardless of this setting.
7.
The fourth position will now be flashing. This indicates the height
format in the “English mode”: “1” = feet & inches, “0” = inches. Use
the and buttons to input your desired setting. Press
ENTER
.
8. “b0111” will display with the left most “1” flashing. These positions
are not currently used. Press
ENTER
four times to exit.
