3.5 Loosen the harness restraint
Find the right position of harness strap
adjuster. (See position 1 as showed in
the left picture)
Keep pressing down the harness straps
adjuster by one hand, meanwhile grip
two shoulder straps and pull them
towards you by the other hand.
With the operation mentioned above,
you can loosen the harness restraint
and adjust as you required.
1
1.Put both side of
together.
the buckle clip
2.Put the metal plates into the button as the picture shows. when hear
a click, it shows it
fi
ts well. pull the metal to check whether the buckle is
fi
tting correct.
3.If need to release the straps, press the red button, The clip will be released.
3
.
3
Operation of buckle
First step
Second step
Third step
3
.
4 Adjust the harness straps
Pull the adjustment straps until the harness
straps are totally tight.
The shoulder restraint shall be adjusted as
tightly as possible without causing
discomfort to your child. Check whether
the straps are adjusted tightly enough and
not twisted when the child is placed in the
seat. Be sure the distance between the
shoulder straps and shoulder is less than 1
cm.The lab strap shall be worn low down,
so that the pelvis is
fi
rmly engaged.
The loose straps are very dangerous for
the child.
Page 6 of 11