NOISE PLETHORA V1- ASSEMBLY GUIDE – Rev. Feb 2022
BAG C
PIN HEADERS
Place and solder the Pin Headers on the silkscreen side of the main board (It is the shorter pins that you are soldering).
Double check they all are perfectly straight.
Qty
PINs
Name on PCB
2
2x2
CON1, CON3
2
2x5
CON2, CON4
1
2x8
CON5
SOCKET CONNECTORS
Place the socket connectors on the control board over the silkscreen markings at positions and solder. Double check
they all are perfectly straight.
Qty
PINs
Name on PCB
2
2x2
#CON1, #CON3
2
2x5
#CON2, #CON4
1
2x8
#CON5
PREPARING TEENSY AND CODEC
Now we will place Teensy and the codec.
Make sure orientation and placement is good before soldering.
SOCKET CONNECTORS
Socket connectors will be soldered in the PCB. Place sockets on the PCB, at components side, minding the size,
but do
not solder them.
Qty
Size
Place on PCB
2
1x8
IC11
2
1X14
Long sides of footprint
Place pin headers into the sockets, the long side of the pins that will fit in.
Place
Teensy
(
USB facing up
) and
codec
(
Befaco name facing up
) boards on the pins, watch
the footprint for the orientation. Do this
gently.
Double check they all are perfectly straight,
Once all pins are in place,
proceed to solder
them all, both at PCB and teensy, Pushing down the teensy and codec gently.
CHECK OUR VIDEO TUTORIAL IF YOU HAVE FURTHER DOUBTS.-- > Follow the QR -->
4
