BeeWi BBZ301, User Manual, Page: 6 / 76

6
ENGLISH
charging socket located underneath the helicopter. Do not force, the
cable end should connect smoothly.
- During the charging process, the USB charger light will turn off; if the
light turns on again, it means the helicopter is fully charged.
2.2. BeeWi HeliPad Installation
Go to market and look for “BeeWi-HeliPad”
app. Follow the on-screen indications to
download and install the app. Once the
application has been successfully installed,
you can launch it directly. Insure the
Helicopter has been paired and connected
prior to start the application.
2.3. Pairing
To pair the Helicopter with your device,
refer to the pairing procedures in your
mobile phone user manual and follow the
instructions below:
- Power on the Helicopter to turn the unit in
pairing mode (wait 30 seconds)
- In the Smartphone Bluetooth menu, search
for devices, select the device named
“BeeWi BBZ301” to pair it.
4