Beem Multi-back Topclass 5 in 1, User Manual

Page: 39 / 108

35
EN Multi-back Topclass 5 in 1
BEEM - Elements of Lifestyle
Limitation of liability
We assume no reliability for damage or
follow-up damage in the case of:
failure to observe the instructions in ■
the user manual,
use for other than the intended pur-
■
pose,
improper or unsuitable handling,
■
incorrectly performed repairs, ■
unauthorised modifications, ■
use of non-approved parts or spare ■
parts,
use of unsuitable supplementary or ac-
■
cessory parts.
Troubleshooting
The following table will help you locate and eliminate minor faults:
fault Possible cause remedy
E00 appears in the display. Appliance is too cold.
Wait until the appliance
has reached room tem-
perature.
E01 appears in the display. Appliance is still too warm af-
ter the last baking programme.
Wait until the appliance
has cooled down.
EEE appears in the dis-
play.
Temperature sensor open. call customer service.
HHH appears in the
display.
Short-circuit in temperature
sensor.
call customer service.
NOTE
If you cannot resolve the problem with the steps described above, please contact ►
customer service.
For problems relating to the baking result, please refer to the notes in the recipe
►
book supplied.