31
EN
5. To rinse the device, allow two tankfuls (14 cups) of clear water to run through it. The
device is now descaled and ready to be used again.
The message
REINIGEN
(CLEAN) regularly appears on the display (
10
) as a
reminder that the device needs to be cleaned or descaled. The symbol disappears
again after two run throughs.
Storage
Disconnect the device from the mains power when it is not going to be used for a
prolonged period. Clean the device again if necessary (see the “Cleaning and Care”
chapter) and let it dry completely.
Store the device and all accessories in a dry, clean, frost-free place that is protected from
direct sunlight and cannot be accessed by children or animals.
Troubleshooting
If the device does not work properly, check whether you are able to rectify the problem
yourself. If the problem cannot be solved with the steps that are listed, contact the
customer service department.
Do not attempt to repair a defective electrical device yourself!
Problem
Possible cause
Fix
Nothing is shown
on the display (
10
).
Is the mains plug inserted in
the plug socket correctly?
Insert the mains plug.
Is the plug socket defective?
No mains voltage is present.
Try another plug
socket.
Check the fuse of the mains
connection.
Is the display defective?
Contact our customer
service department.
The fuse in the fuse
box is triggered.
Too many devices
connected to the same
circuit.
Reduce the number of
devices in the circuit.
No error can be identi
fi
ed.
Contact our customer
service department.
Water runs out of
the device.
Is there too much water in
the water tank (
7
)?
Do not over
fi
ll the water
tank!
03840_DE-EN-FR-NL_A5_V2.indb 31
03840_DE-EN-FR-NL_A5_V2.indb 31
27.09.2017 08:25:11
27.09.2017 08:25:11
