Beem Fresh Aroma Perfect, User Manual

Page: 35 / 88

BEEM - Elements of Lifestyle 31
EN Fresh-Aroma-Perfect V2
Troubleshooting
The following table will help you locate and eliminate minor faults:
Fault Possible cause Remedy
No symbol in the display.
Not plugged in. Insert the mains plug.
No mains power.
Check the fuse/mains
socket.
Display defective.
Contact customer serv-
ice.
The automatic circuit break-
er in the fuse box trips.
Too many appliances connect-
ed to the same power circuit.
Reduce the number of
appliances on the power
circuit.
No fault detected.
Contact customer serv-
ice.
Water runs out of the ap-
pliance. Too much water in the water
tank. Do not over fi ll the water
tank!
The coffee is dispensed
into the coffee jug very
slowly. Drip protector blocked. Clean drip protector.
Appliance is scaled. Descale the appliance.
The coffee does not run
into the coffee jug. Coffee jug lid is not correctly
fi tted.
Fit the lid correctly.
The coffee is too weak.
Too much water in the water
tank.
Only fi ll in the amount
of water required for the
desired number of cups.
Grounded coffee does not
fall into the
fi lter compart-
ment.
Grinder shaft blocked. Clean grinder shaft.
Strong build-up of steam
whilst brewing coffee.
Appliance severely scaled.
Descale the appliance
several times.
NOTE
If you cannot resolve the problem with the steps described above, please contact ►
customer service.