Beem D3.001, Operating Instructions Manual

Page: 23 / 56

21
EN Power Station Pro4
BEEM - Elements of Lifestyle
Selecting the ironing temperature
The following table and the labels attached to garments indicate which temperature set-
ting should be used for ironing. The symbol in the column on the right indicates that
steam ironing is not possible at this temperature level.
Temperature fabric Recommendations
low
Synthetics •
Silk •
Nylon •
Acrylic •
Acetate •
Iron dry and preferably from the inside.
middle
Wool •
Polyester •
Viscose •
Lay a cloth over the material and steam iron
preferably from the inside.
high
Linen •
Cotton •
Damp iron laundry
max .
Linen •
Cotton •
Steam ironing
NOTE
The following particularly applies to ►
mixed fabrics and textiles with appli-
cations: if you are unsure which tem-
perature level to use when ironing a
garment, try ironing an area that is
not visible when wearing. Start at a
lower temperature level.
Iron different textiles preferably in
►
ascending temperature order.
Allow the appliance to cool for at
►
least eight minutes if you wish to
change from a higher to lower tem-
perature level.
Dry ironing
Only allow the steam iron to heat up
‹
while it is standing on the base stati-
on.
Insert the plug of the appliance into
‹
the mains socket. The power indicator
(8) and the water tank light (18) light
up.
Press the temperature selection but-
‹
ton (4) repeatedly until the desired
temperature level starts flashing in the
display. As soon as the appliance has
heated up to the selected tempera-
ture, the appliance emits an acoustic
signal and the selected temperature
lights up constantly.