Beem B41.001, User Manual

Page: 15 / 58

EN Nobilis
BEEM – Elements of Lifestyle 11
Designated use
This appliance is intended for the toasting,
warming and thawing of toast, bread
slices, bagels or rolls in household or
similar non-commercial areas, such as:

Staff kitchens in shops, cafés, offices
or other employment environments

Agricultural estates

Use by guests in hotels, motels or
other forms of accommodation

Bed and breakfast establishments
Any other use, or a use which goes be-
yond these, constitutes improper use.
All claims whatsoever for damage arising
from improper use are excluded.
The owner bears the sole risk.
Symbols used
DANGER
This is used for a hazard which is an
immediate threat leading to severe bodily
injury or to death.

To avoid the hazard, follow the in-
structions given here.
WARNING
This is used for a possibly hazardous
situation which could lead to severe bod-
ily injury or to death.

To avoid the hazard, follow the in-
structions given here.
CAUTION
This is used for a possibly hazardous
situation which could lead to minor inju-
ries.

To avoid the hazard, follow the in-
structions given here.
ATTENTION
This is used for a situation which could
lead to material damage.

To avoid the hazard, follow the in-
structions given here.
Getting started
Unpacking
Proceed as follows:
1. Take the appliance, all accessories
and the user manual out of the box.
2. Remove all packaging material and
protective films from the appliance and
the accessories before using them for
the first time. Never remove the type
plate or any warning notices.
3. Keep the original packaging for the
duration of the appliance’s warranty or
guarantee period so that the appliance
can be packaged properly for shipping
in the event of a warranty claim.
Shipping damage voids the guarantee
or warranty.
Checking the scope of supply
Proceed as follows:
1. Check the contents for completeness
and visible damage. Do not operate a
damaged appliance.
2. Notify your supplier promptly in case
of an incomplete or damaged delivery.
Power connection
The following regulations for the electrical
supply must be observed to ensure safe
and trouble-free operation of the appli-
ance: