9
16) Lower The Barbecue Into The
Cart
You will need to tease the side panels apart slightly to be able to
put the barbecue into place. Make sure the barbecue is pushed
back against the rear edge of
the cart, and the front of the
barbecue is flush with the front
of the cart.
You do not need to screw
anything in at this stage. That
is done in the next two steps.
Assembly Instructions
1
2
3
a
b
15) Fit The Hose To The Barbecue
You need to connect the proper hose to the barbecue inlet before the barbecue is in place in the cart. You
should follow the separate barbecue instructions for directions on methods of connection and leak testing.
If you purchased a side burner:
Pass hose a through the side hole (arrow 1) and
connect to the barbecue. Follow your separate side
burner instructions for remaining connection details.
If you did not purchase a side burner
:
If you are using a portable LPG/propane cylinder and
you wish to place the bottle on the
outside
of the
cabinet, thread the hose and regulator (b) through the
hole in the side panel (arrow 1), and connect to the
barbecue.
If you are using a portable LPG/propane cylinder
and you wish to place the bottle on the
inside
of the
cabinet, thread the hose and regulator (b) past the top
enclosure panel from underneath (arrow 2) and connect
to the barbecue.
If you are using piped gas, your gas plumber may
choose to thread a special hose from the rear of the
cart (arrow 3).
