9
MAINTENANCE AND CLEANING
WARNING!
Before maintenance or cleaning is carried out,
the canopy cooker hood should be disconnected from
the main power supply. Ensure that the cooker hood is
switched off at the wall socket and the plug removed.
WARNING!
External surfaces are susceptible to scratches and
abrasions, so please follow the cleaning instructions
to ensure the best possible result is achieved without
damage.
Stainless steel surface
These instructions must be followed to avoid a fire risk.
Clean stainless steel surfaces using non-abrasive cleaning
products that are specifically for use on stainless steel.
To ensure best results also use an even pressure and follow
the grain of the stainless steel. Use of a soft cloth reduces
the risk of scratching. If the cloth is wet ensure that a dry
soft cloth is used to wipe down the surface again reducing
the risk of any surface rust appearing.
Cleaning grease filters
The filters can be cleaned by hand or dishwasher. After
cleaning ensure the filters are completely dry before
refitting. Grease filters must be removed every four weeks
(maximum) for cleaning to reduce the risk of fire.
• By hand -
Soak in warm water and some washing up
liquid. For stubborn grease stains use a soft nylon
brush to help remove these stains.
• In a dishwasher -
Ensure that placement of the
filters is made so as to not impede the function of
the dishwasher spray arm. Washing the filters in
a dishwasher may cause discolouration over time
although it will not effect their performance. Filters
should be washed separately to crockery and other
kitchen utensils.
Removing filters
Remove filters by pushing the knob to the rear of the hood
and lowering the front and then once out, pulling towards
you until the rear of the filter comes out of the frame.
Do not use the cooker hood without filters installed.
Do not clean the canopy cooker hood with water
using a hose or high pressure cleaner.
MAINTENANCE AND CLEANING
