3
Assembling Your Backboard & Ring
Attach ring (part 3) to the back-
board (part 1) using two Bolts, Nuts
and Washers B (M8 x 40mm) and
two Bolts, Springs & Nuts D (M8 x
110mm). The spring bolts (D) go in
the two holes closest to the ring,
and the plain bolts go in the bottom
holes. The bolts go through the ring
then through the backboard and are
fixed in place using the nuts.
1
2
Attach the two Board Bracktes (parts 2) to the Backboard (part 1) using four Bolts, Nuts and Washers A (M8 x
65mm).
Attach Backboard Brackets
You will need:
1 x Backboard (part 1) 4 x Bolts, Nuts & Washers A (M8 x 65mm)
2 x Board Brackets (parts 2)
Attach Ring to Backboard
You will need:
Pre assembled parts from step 1 (backboard with brackets)
2 x Bolts, Springs, Nuts & Washers D (M8 x 110mm)
2 x Bolts, Nuts & Washers B (M8 x 40mm)
Hoop/Ring (part 3)
They should sit in this order once assembled:
Bolt > Washer > Bracket > Backboard > Washer > Nut
They should sit in this order once assembled:
Bolt > Washer > Ring > Backboard > Washer > Nut
