4
3
Join the Top Pole and Middle Pole
You will need:
Parts as assembled in Step 1 & 2
Middle Pole (part 7)
1 x Bolt D (plastic handle)
1 x Bolt, Nut & Washers E (M10 x 90mm)
Fix the Middle Pole (part 7) to the Top Pole (which is al-
ready attached to the assembled backboard and ring).
Insert the plastic handle (Bolt D) into the welded
protruding nut. Now put Bolt, Nut & Washers E in the hole
below. Once you have done this, carefully place these
assembled parts to one side.
4
Assemble the Base
You will need:
Base (part 9)
Bottom Pole (part 8)
Metal Rod - Wheel Axle (part 10)
2 x Wheels (part 11)
Place the base on a solid, flat horizontal surface.
Fix the Bottom Pole (part 8) and the Wheels (parts 11) to the Base (part 9) using the Metal Rod/Wheel axle (part 10).
The wheels and wheel axle are already in the base so you will need to slide the axle out first.
You attach the bottom pole and wheels in the following order;
Metal Rod > Wheel > Base > Bottom Pole > Base > Wheel
You may need to pull the metal rod/wheel axle towards you slightly in order to get it to slot in through all the
parts.
Now the base is assembled - put it to one side.
