BEDRUG
®
CLEANING INFORMATION
The mildew resistant BedRug foam will not absorb liquids. The engineered polypropylene fiber top surface resists
stains and deterioration from most acids, chemicals, gas and oils, etc. Therefore, by following the cleaning
instructions below, your BedRug will remain serviceable for as long as you own your vehicle.
Cleaning your BedRug
is easy:
1.
A vacuum, broom, brush or compressed air can be used to remove dirt, grime, sand, mulch etc. Due to
the fact that water will not harm the BedRug, pressure washing is also an effective way to clean a
soiled BedRug.
2.
Although most acids will not harm the BedRug, baking soda should be applied immediately to
neutralize the acid to ensure the safety of the paint on the vehicle.
3.
To clean tougher jobs such as gasoline, oil, chemicals, acid spills or leaks from your BedRug use
detergent soap with degreaser and water, then rinse thoroughly. This detergent soap is used in most car
wash locations with pressure washing equipment. The BedRug polypropylene closed-cell foam will
not absorb water and the polypropylene fiber dries in minutes.
If you have additional questions, call BedRug Inc. customer service at 800-462-8435.
Retain this cleaning information with your vehicle owner’s manual for future reference.
LIMITED WARRANTY
BedRug Inc. warrants BedRug
®
and BedTred
TM
products for Jeep vehicles for three years from the original date of
purchase. Warranty is limited to the original purchaser and is not transferable. Product is warranted to be free from
defects in materials and workmanship. The warranty is void if the product has been damaged by accident,
unreasonable use, neglect, improper service/installation/removal, modifications, acts of God, normal wear and tear,
or other causes not arising out of defective materials or workmanship. Consequential and incidental damages are
not covered under this warranty. Warranty does not cover labor, the cost of shipping, or cost of returning the
product for warranty service or inspection. The terms of this warranty may vary from state to state. You may have
rights under specific state laws that differ from the terms of this warranty. Proof of purchase will be required for
warranty service. Product should be cleaned before return. A return authorization number must be obtained prior
to returning any product. For warranty instructions, returns, and packaging contact BedRug Inc. Customer Service
at 800-462-8435.
Retain this warranty information with your vehicle owner’s manual for future reference
PRODUCT REGISTRATION
Thank you for purchasing your BedRug product! We would appreciate it if you would take a few minutes to
register your purchase. Registration allows us to provide, with your permission, important updates, service
information, helpful hints or warranty service should you ever require technical support. BedRug offers the option
of returning product registration forms electronically, rather than having to fill them out by hand. You can be
assured that BedRug does not share or sell the information you provide. Save a copy of your sales receipt. Activate
your warranty by registering your product online at
http://www.bedrug.com/customer-service/product-
registration.html
or by scanning the QR code. You will need the 6-digit lot and date code found on the underside of
the tailgate, see label example below.
BR-BTJK07FINST
REV. 1 8/16/2013
Page 4 of 4